1046V
โปรโมชั่นพิเศษสุดยังลดราคาได้อีก โทร. 085-6383516
Your shopping cart is empty!
คำอธิบายของผลิตภัณฑ์
- Four independent channels of operation, stereo linkable in two pairs
- PeakStopPlus™ limiting control for setting maximum allowable level regardless of compressor settings
- Independent Threshold and ratio controls
- Switchable OverEasy® or Hard Knee compression
- Classic dbx® compression
- Differentially balanced gold-plated XLR and 1/4" inputs and outputs
- True RMS level detection
- Precision metering of input level, output level, and gain reduction
- Dual True stereo or quad mono operation
- Switchable +4dBu or -10dBV operation per channel
Input Connectors | XLR and 1/4" TRS (Pin 2 and tip hot) |
Input Type | Electronically balanced/unbalanced, RF filtered |
Input Impedance | Balanced > 40 kOhm, unbalanced >20 kOhm |
Max Input | > +22 dBu balanced or unbalanced |
CMRR | Typically >50 dB at 1 kHz |
Output Connectors | XLR and 1/4" TRS (Pin 2 and tip hot) |
Output Type | Servo-balanced/unbalanced, RF filtered |
Output Impedance | Balanced 30 Ohm, unbalanced 15 Ohm |
Max Output | > +22 dBm balanced, > +20 dBm unbalanced |
Bandwidth | 20 Hz to 20 kHz, +0/-0.5 dB |
Frequency Response | 0.35 Hz to 90kHz, +0/-3 dB |
Noise | < -96 dBu, unweighted, 22 kHz measurement bandwidth |
Dynamic Range | > 118 dB, unweighted |
THD+Noise | >0.008% typical at +4 dBu (1 kHz unity gain), 0.08% typical at +20 dBu (1 kHz unity gain), < 0.1% any amount of compression up to 40 dB, 1 kHz |
IMD | < 0.1% SMPTE |
Interchannel Crosstalk | < -80 dB 20Hz to 20 kHz |
Stereo Coupling | True RMS Power Summing |
Compressor Threshold Range | -40 dBu to +20 dBu |
Compressor Ratio | 1:1 to infinity:1 |
Compressor Threshold Characteristic | Selectable OverEasy® or hard knee |
Compressor Attack/Release Characteristic | AutoDynamic™ |
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process. The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time. Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment. Shipping time: The time for your item(s) to tarvel from our warehouse to your destination. Shipping from your local warehouse is significantly faster. Some charges may apply. In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping! |