RE510

คำอธิบายของผลิตภัณฑ์

Case MaterialMetalConnector Type3-pin XLRDiameter (Max)50mm(1.97)ElementCondenser (self-biased)FinishNon-reflecting BlackFrequency Response50 - 20,000 HzImpedance, Low-Z balanced150 ΩMaximumSPL(1%THD)140dBMic TypeHandheldOpen Circuit Voltage2.5mV/PascalPolar PatternSupercardioidPower Requirement24 - 52 VDC PhantomWired/WirelessWiredHeight180mm(7.09)Weight Net7.58oz(215g)

KeyFeatures:
• 5/8 diameter self biased condenser capsule
offers the warmth of a larger capsule design
without sacrificing off-axis performance or
transient response
• Low-frequency roll-off switch enables
tailoring of low-frequency response to meet
application requirements
• Supercardioid polar pattern for superior
feedback rejection and acoustic isolation
• Modern high-speed electronic design for
extremely low distortion, and outstanding
transient response
• High current differential output stage can
drive long microphone cables without loss of
performance
• Warm Grip handle for more comfortable feel
• Multistage pop filter eliminates breath pop
noises
Technical Specifications:
Generation Element: Self-Biased condenser
Frequency Response: 40 Hz to 20,000 Hz (see chart)
Polar Pattern: Supercardioid (see chart)
Sensitivity, Open Circuit
Voltage, 1 kHz:
3.2mV/Pascal
Clipping Level, 1 kHz: +2 dBV
Maximum SPL, 1 kHz: 146 dB SPL (1% THD)
Self Noise: 22 dB SPL “A” weighted (0 dB=20
micropascals)
Dynamic Range
(Maximum SPL to A
Weighted Noise Level):
124 dB
Signal-to-Noise Ratio: 72 dB (@ 94 dB SPL)
Output Impedance, 1 kHz: 250 ohms
Power Requirements: Phantom Supply Requirement: 24 to
48 VDC
Polarity: Positive pressure on diaphragm
produces positive voltage on pin 2
relative to pin 3
Dimensions: Length = 7.15 (182 mm)
Diameter = 2.0 (51 mm)
Shank = 1.0 (25 mm)
Accessories Included: 326 Stand Adapter (Black)
Soft Zippered Gig Bag
Optional Accessories: 323S Stand Adapter
376 Charcoal Windscreen
379-1 Black Windscreen
379-2 Red Windscreen
Net Weight: 9.2 oz. (260 grams)
RE510
Handheld Condenser
Microphone
General Description:
The RE510 is a professional quality hand-held condenser
microphone that was designed especially for vocalists. The
RE510 features a 5/8 diameter capsule, advanced
electronic design, and best of all, a sound that will enhance
any vocal performance.
The high frequency response of the RE510 has been
designed to provide just the right amount of definition and
“air” without the stridency so common in other condenser
vocal microphones.
The low frequency response of the RE510 in combination
with the low frequency selector switch provides versatility
that was designed to be truly useful. With the low frequency
selector switch in the rolled off position, the low end of the
RE510 is tailored to compensate for proximity effect and
provides full, clean sound without muddiness. When
increased low-end is desired, placing the low frequency
selector switch in the flat position adds just enough warmth
to be noticeable, but not overbearing.
The wide bandwidth, high SPL handling capability, and low
frequency selector switch of the RE510 also make it a
versatile instrument microphone for most any application.
The low frequency selector switch is securely located
beneath the ball screen and can’t be changed inadvertently.
Frequency Response:
12000 Portland Avenue South, Burnsville, MN 55337
Phone:952/884-4051, Fax:952/884-0043
www.electrovoice.com
© Telex Communications, Inc. 6/2007
Part Number 38110-130 Rev E
U.S.A. and Canada only. For customer orders, contact Customer Service at:
800/392-3497 Fax: 800/955-6831
Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:
+ 49 9421-706 0 Fax: + 49 9421-706 265
Other International locations. For customer orders, contact Customer Service at:
+ 1 952 884-4051 Fax: + 1 952 736-4212
For warranty repair or service information, contact the Service Repair department at:
800/553-5992 or 402/467-5321
For technical assistance, contact Technical Support at: 800/392-3497 or 952/736-4656
Specifications subject to change without notice.
Polar Response:
Microphone Use and Placement
Please note that micing techniques are a matter of personal
preference. These are merely guidelines to assist in the placement
of the microphone to gain optimal performance.
Usage Optimal Placement
Vocals Zero to six inches from the windscreen, and on
axis with the microphone.
Spoken Word Five to ten inches from the windscreen, and on
axis with the microphone.
Dimension Drawing:
RE510 Part Number: 301259-000
Standard Placement amp; Use Guidelines
1. Always point the microphone at the desired source of sound, and
away from any unwanted sources.
2.The microphone should be located close to the sound source to
minimize interference from other potential sound sources.
3. Use the 3-to-1 rule when using multiple microphones. Place each
microphone three times farther from other microphones as from the
desired sound source.
4. Minimize over-handling of the microphone to reduce unwanted
mechanical noise.
5.Working close to the microphone will increase the bass tone and
also provide increased gain-before-feedback.
Low Frequency Selector Switch
Location:

เครื่องเสียง,ห้องเทรนนิ้ง,มิกเซอร์,หรือใช้งานทั่วไป,ตู้ลำโพง,อุปกรณ์ต่างๆ,งาน,ชุดประชุม,ห้องประชุม,ขายึดต่างๆ,โฮมเธียเตอร์,ตู้ลำโพงกลางแจ้ง,คอมพิวเตอร์พกพา,สำหรับสถานบันเทิง,รับติดตั้งระบบเสียงตามสาย,เครื่องเสียงติดรถยนต์,คาราโอเกะ,ชุดประชุม,เครื่องเสียง,งานประมูล,ไมโครโฟน,ราคาลำโพง,ติดตั้งเครื่องเสียงห้องประชุม,รถเครื่องเสียง,เพาเวอร์แอมป์,ยามาฮ่า,ปรับแต่ง,ดอกลำโพงกลางแจ้ง,กลางแจ้ง,เครื่องเสียงรถยนต์,เสียง,อีควอไลเซอร์,ตัวแทนจำหน่ายเครื่องเสียงกลางแจ้ง,ปลั๊ก,อุปกรณ์ขาตั้ง,วิธีการสั่งซื้อ,บ้านหม้อ,เครื่องเสียงรถยนต์,เครื่องเสียงกลางแจ้งครบชุด,เครื่องเสียงโฮมเธียเตอร์เครื่องเสียงกลางแจ้งเครื่องเสียงกลางแจ้งมือสองเครื่องเสียงห้องประชุม,

เขียนรีวิว

โน๊ต: ไม่รองรับข้อความแบบ HTML!
    ไม่ชอบ           ชอบ

When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

img

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

Size Chart