SQ1D

SQ1D

0 รีวิว 0 ขาย. Only 1 ยังคง
22,500 บาท -10%
ผู้ผลิต:
รหัสสินค้า: SQ1D
สถานะสต๊อก: มีสินค้าในสต๊อก

คำอธิบายของผลิตภัณฑ์

 

 

Square One Dynamics

Square ONE Dynamics

The constantly-changing hardware requirements of technical riders are just one of the many issues audio rental companies and live music venues have to deal with. Having to retain a comprehensive inventory of different devices, as well as reconfiguring outboard processing racks is a costly, time-consuming task, further complicated by the number of hardware options available.

The solution: KLARK TEKNIK Square ONE dynamics.Eight channels of flexible, configurable, high-performance dynamics processing in one 3U package. The right brand, the right combination, the right investment, every time.

Photos

Click the images below to view or download high resolution images.

Dynamics Front

Square ONE Dynamics - Front

Dynamics Back

Square ONE Dynamics - Back

 

Technical Specification

Dynamics Inputs Eight
Type Electronically balanced XLR (pin 2 hot)
Impedance (Ω) 10k
Ext Key Inputs Eight
Type Electronically balanced TRS Jack (Tip hot)
Impedance (Ω) 20k
Solo Bus Input One
Type Electronically balanced XLR (pin 2 hot)
Impedance (Ω) 20k
Dynamics Outputs Eight
Solo Bus Output One
Type Electronically balanced XLR (pin 2 hot)
Minimum load impedance 600Ω
Source impedance <60 Ω
Maximum level +22dBu into >2kΩ
Performance
Frequency response 20Hz – 20kHz ±0.5 dBu
Distortion (THD+N) <0.02% @ 1kHz, +4 dBu
Noise Floor <-95 dBu @ Unity Gain
Dynamic range (20Hz-20kHz unweighted)
>117 dB
Compressor
Threshold (Hard Knee) -50dB to +25dBu
Gain 0dB to +30dB
Attack 100us to 20ms
Release 50ms to 2.5s
Ratio ∞ to 1:
Gate
Threshold -50dB to +25dBu
Attack 10µs to 10ms
Release 2ms to 2s
Hold 2ms to 2s
Range ∞ to 0dB
Sidechain Bandpass filter
Frequency Range 40Hz -16kHz
Slope (Wide) 6dB per Octave
Terminations
Audio 3-pin XLR and 1/4” TRS jack
Power 3-pin IEC
Power Requirements
Voltage 100V-240V a.c. ± 10%
Consumption <35W
Dimensions
Height 133mm (5.25 inch) – 3U High
Width 482mm (19 inch)
Depth 205mm (8 inch)
Weight
Nett 4.4kg
Shipping 5.4kg

 

Architects and Engineers Specification

The Dynamics Processor shall provide eight complete channels of either compression or gating, with push button selection and LED status indication of operational mode on an individual channel basis.

The compressor section on each channel shall provide for adjustment of Threshold, Make-Up Gain, Attack and Release times and Ratio. There shall be push button selection of RMS or Vintage Emulation (Peak) response and push button selection of Soft or Hard knee mode on each channel.

The gate section on each channel shall provide for adjustment of Threshold, Attack, Hold and Release times and Range.

The Threshold, Attack and Release controls shall be operable by the same rotary control knobs in compression and gating modes. Control of Ratio and Range shall be performed using the same rotary control knob. There shall be individual rotary control knobs for Make-Up Gain and Hold.

Each channel shall have a six-segment input level meter and a ten-segment attenuation depth meter, which will show the gain reduction being applied in both compression and gating modes.

Each channel shall have a sidechain band-pass filter with a rotary control knob for frequency control and shall be enabled by a push button switch. The band-pass filter shall have two different bandwidth settings, selectable by a push button switch. There shall be provision for an external sidechain input selected by the External Key switch with LED status indication.

The Bypass switch shall set the signal path to unity gain on each channel and provide LED status.

Each channel shall have a Solo switch with LED status indication that sends the sidechain signal to the Solo Bus Output connector.

A Solo Bus Input connector shall allow multiple Dynamics units to be chained together to form a common Solo Bus Output.

The Side Chain Solo In Place switch shall have LED status indication and change the function of each Solo switch; when selected the sidechain signal shall be sent to the channel output connector instead of the Solo Bus Output.

The Dynamics Processor shall have the ability to link the operation of any number of adjacent channels, which shall all be summed into the sidechain of the left-hand linked channel which shall control the gain of each of the linked channels. The selection of either compression or gating for the left-hand linked channel shall override the push button settings for all channels linked to it.

A Power On Led shall be provided.

The Dynamics Processor shall meet or exceed the following specifications:

Distortion

(THD+N) <0.02% @1kHz, +4dBu

Frequency response

+/-0.5dB (20Hz-20kHz)

Dynamic Range

(20Hz-20kHz unweighted) >117dB

Each channel shall have XLR connectors for the input and output and a 1/4" TRS jack socket for the external side chain input. All audio connections shall be electronically balanced.

The Dynamics Processor shall be 19" standard rack mountable and 3U high.

The Dynamics Processor shall be capable of operating from a 100-240V +/- 10% 50/60Hz a.c. power source.

The Dynamics Processor shall be the KLARK TEKNIK Square ONE Dynamics, and no alternative specification option is availab

 

หน่วยประมวลผลจะต้องให้ Dynamics แปดช่องที่สมบูรณ์ของการบีบอัดหรือ gating กับการเลือกปุ่มกดและจอแสดงสถานะ LED ของโหมดการทำงานบนพื้นฐานช่องแต่ละ
 
ส่วนคอมเพรสเซอร์ในแต่ละช่องต้องจัดให้มีการปรับเกณฑ์ Make-Up ครั้งกำไรโจมตีและ Release และอัตราส่วน จะต้องมีผู้เลือกปุ่มกด RMS หรือ Emulation Vintage การตอบสนอง (Peak) และผลักดันการเลือกปุ่มของโหมดเข่านุ่มหรือแข็งในแต่ละช่อง
 
ส่วนประตูในแต่ละช่องต้องจัดให้มีการปรับเกณฑ์การโจมตีถือและปล่อยครั้งและช่วง
 
ควบคุมเกณฑ์การโจมตีและปล่อยให้เป็นไปตาม operable เดียวกันลูกบิดควบคุมแบบหมุนในโหมดการบีบอัดและ gating การควบคุมอัตราส่วนและช่วงจะต้องดำเนินการโดยใช้ปุ่มควบคุมแบบหมุนเดียวกัน มีจะต้องเป็นบุคคลลูกบิดควบคุมแบบหมุนสำหรับกำไร Make-Up and Hold
 
แต่ละช่องจะต้องมีหก-​​segment เครื่องวัดระดับการป้อนข้อมูลและสิบเมตรส่วนลึกลดทอนซึ่งจะแสดงการลดกำไรถูกนำมาใช้ทั้งในโหมดการบีบอัดและ gating
 
แต่ละช่องจะมีตัวกรองผ่านแถบ sidechain กับลูกบิดควบคุมแบบหมุนสำหรับการควบคุมความถี่และจะเปิดใช้งานโดยสวิทช์ปุ่มกด ตัวกรองผ่านแถบให้มีการตั้งค่าแบนด์วิดธ์สองที่แตกต่างกันเลือกได้โดยสวิทช์ปุ่มกด จะต้องมีผู้จัดหาสำหรับการป้อนข้อมูล sidechain ภายนอกเลือกโดยสวิทช์กุญแจภายนอกมีข้อบ่งชี้สถานะ LED
 
สวิทช์บายพาสจะกำหนดเส้นทางสัญญาณไปสู่​​การเพิ่มความสามัคคีในแต่ละช่องและให้ไฟ LED
 
แต่ละช่องจะมีสวิทช์เดี่ยวมีข้อบ่งชี้สถานะ LED ที่ส่งสัญญาณไป sidechain โดยสารเชื่อมต่อขาออกเดี่ยว
 
เดี่ยวโดยสารเชื่อมต่อขาเข้าจะยอมให้หน่วย Dynamics หลายคนเพื่อให้ถูกล่ามโซ่ด้วยกันเพื่อสร้างเดี่ยวออกที่พบบ่อยโดยสาร
 
เดี่ยวโซ่ข้างในสวิทช์เพลสจะได้ LED แสดงสถานะและเปลี่ยนการทำงานของสวิทช์เดี่ยวแต่ละ; เมื่อเลือกสัญญาณ sidechain จะถูกส่งไปยังขั้วต่อออกช่องแทนของ Output รถเดี่ยว
 
ประมวลผล Dynamics ต้องมีความสามารถในการเชื่อมโยงการดำเนินงานของจำนวนช่องที่อยู่ติดกันซึ่งจะถูกนำเข้ามาใน sidechain สรุปของช่องเชื่อมโยงด้านซ้ายมือซึ่งจะได้รับการควบคุมของแต่ละช่องที่เชื่อมโยง เลือกของการบีบอัดหรือ gating สำหรับช่องทางที่เชื่อมโยงด้านซ้ายมือจะแทนที่การตั้งค่าปุ่มกดสำหรับทุกช่องเชื่อมโยงกับมัน
 
สัญญาณไฟจะต้องมี
 
หน่วยประมวลผลจะ Dynamics หรือเกินกว่าข้อกำหนดดังต่อไปนี้:
 
การบิดเบือน
(THD + N)% <0.02 @ 1kHz, +4 dBu
 
การตอบสนองความถี่
+ /-0.5dB (20Hz-20kHz)
 
ช่วงไดนามิค
(20Hz-20kHz ชั่ง)> 117dB
 
แต่ละช่องจะต้องมีการเชื่อมต่อสำหรับ XLR input และ output และ 1/4 "TRS ซ็อกเก็ตแจ็คสำหรับใส่ห่วงโซ่ด้านนอก. ทั้งหมดเชื่อมต่อเสียงจะสมดุลทางอิเล็กทรอนิกส์
 
ประมวลผล Dynamics ต้อง 19 "ชั้นมาตรฐาน mountable และ 3U สูง
 
ประมวลผล Dynamics จะต้องสามารถดำเนินงานจาก 100-240V + / - 10% 50/60Hz AC แหล่งพลังงาน
 
ประมวลผล Dynamics จะ KLARK TEKNIK Square One Dynamics และตัวเลือกสเปคไม่มีทางเลือกเป็น availab

 

เขียนรีวิว

โน๊ต: ไม่รองรับข้อความแบบ HTML!
    ไม่ชอบ           ชอบ

When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

img

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

Size Chart