WD12AV2

The WEDGE Series is a complete range of active stage monitors designed to offer not only to professional musicians and rental companies, but also to amateur musicians and nonprofessional users, a highly valuable monitoring solution at a very affordable price. The WEDGE stage monitors provide a perfect sound intelligibility and a high SPL in an extremely light-weight and portable enclosure. The coaxial transducers, designed under PROEL specifications, represent the best choice for stage monitors, not only because they fit into more compact cabinets, but also for the fact that they provide a perfect alignment in the emission of high and low frequencies and a controlled directivity for a perfect listening from any position. The lightweight CLASS D amplifier modules with SMPS, coupled to a sophisticated analog processing, provide an impressive sound pressure level, with an extremely detailed response, particularly in the vocal range, and a remarkable resistance to feedback. Two tailored EQ PRESETS are available for the use of the speaker not only for stage monitoring (MONITOR), but also as a MAIN SOUND SYSTEM (FOH). The low-profile, stylish and unobtrusive cabinet, with recessed handles and scratch-resistant polyurethane painting, fits perfectly on any stage. WD12A, with its high SPL and its fullrange response, is the favorite choice for vocals, guitar, horns and electronic instruments or as a high-power monitor for DJs.

• 1” compression driver with 1.35” VC
• 12” woofer with 2.5” VC
• 700 W total peak power
• 50 W continuous class AB amplifier for the high frequencies
• 300 W continuous class D amplifier for the low frequencies
• Switch Mode Power Supply (SMPS)
• Dual LIMITER circuit
• 2 optimized EQ PRESETS for MONITOR or FOH (Front-Of-House) use
• SPL MAX: 124dB
• Frequency response: 50 Hz - 20 kHz
• Lightweight plywood cabinet with black anti-scratch polyurethane paint
• Reinforced metal grille
• Recessed connection panel for added protection
• Two recessed handles for easy transport
• Pole adapter

System type2-way coaxial ventedLow Frequency Device12” woofer with 2.5"VCHigh Frequency Device1” compression driver with 1.35"VCAngular Coverage80°Frequency Response50 Hz - 20 kHzMax SPL at 1mt (peak)124 dBAmplifier Continuous PowerHF: 50 W CLASS AB

Input Impedance30 kohm balanced / 15 kohm unbalancedInput sensitivity0 dBuControlsLEVEL, PRESET selector (MONITOR, FOH), GND liftConnectorsINPUT: COMBO (XLR-F/JACK) - LINK: XLR-MPower Supply230 VAC or 120 VAC 50/60 HzMaximum Consumption445 WRated Consumption*235 WConstructionPlywood with black anti-scratch polyurethane paintPole adapter1 x sideHandles2 x sidesMonitor Taper36° Weight15 kg (33 lb)Dimensions (W x H x D)510x340x500 mm* Rated consumption is measured with pink noise with a crest factor of 12 dB, this can be considered a standard music program.

• LF: 300W CLASS D with SMPS