TSB-110
โปรโมชั่นพิเศษสุดยังลดราคาได้อีก โทร. 085-6383516
Your shopping cart is empty!
คำอธิบายของผลิตภัณฑ์
The TSB-110 is a compact sub-bass enclosure designed to be used in a variety of installed sound system applications ranging from clubs and wine bars to theatres, themed environments and places of worship. It comprises a dual voice coil 10" LF driver in a birch plywood enclosure consisting of two dissimilar compartments, optimally ported to produce substantial sub-bass energy from a cabinet of extremely modest dimensions.
The TSB-110 provides sub-bass support for several Turbosound enclosures including the IMPACT50 and IMPACT80, as well as loudspeakers from the QLight™ series. It is a essentially a dual channel loudspeaker, having two independent voice coils within the same drive unit, and so a single sub- bass enclosure can be configured as part of a high quality two channel system consisting of up to four satellite units per channel. The left and right low frequency input signals, having very little directionality, are summed to generate a mono bass signal. A rear panel connector plate provides left and right stereo inputs and outputs via four colour-coded springloaded push terminals. The TSB-110 has been designed to fit into small spaces or architectural features where a conventional bass unit would be impractical. It can therefore be installed discreetly under bars or stages, or even underneath seating, without affecting sonic performance. M10 rigging points are additionally provided to allow the enclosure to be permanently installed.
FEATURES
- Compact enclosure
- 350 watt power rating
- Dual voice coil speaker
- Nightclubs and theme bars
- Themed environments
- Retail shops
Spec
Net Weight | 18 kg (39.6 lbs) |
---|---|
Dimensions | 330mm x 585mm x 330mm (13" x 23" x 13") |
Components |
1 x 254mm (10") dual voice coil LF driver |
Frequency Response | 45Hz - 180Hz ±4dB |
Power Handling | 300 watts r.m.s., 600 watts program |
Sensitivity | 95dB SPL, 1 watt @ 1 metre |
Maximum SPL | 120dB continuous, 126dB peak |
Impedance | 2 x 4 ohms nominal |
Crossover | Built in high-pass crossover network at 150Hz |
Construction |
15mm (5/8") birch plywood, finished in black textured paint |
Connectors |
2 x input L&R spring-loaded push terminals; 2 x NL4MP; |
Spares & Accessories |
LS-1026 10" LF driver |
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!