SQ1G

SQ1G

0 รีวิว 0 ขาย. Only 1 ยังคง
20,500 บาท -8%
ผู้ผลิต:
รหัสสินค้า: SQ1G
สถานะสต๊อก: มีสินค้าในสต๊อก

คำอธิบายของผลิตภัณฑ์

 

 

Square One Graphic

Square ONE Graphic

KLARK TEKNIK has been designing audio equalisers since 1975, and has an impressive back catalogue, which includes the DN27, DN360 and DN370 three of the industry's finest and longest-established designs.

The Square ONE graphic represents 30-years of KLARK TEKNIK's design expertise, offered at a more accessible price point, bringing superb audio performance within reach of the most budget-sensitive applications.

Photos

Click the images below to view or download high resolution images.

Graphic Front

Square ONE Graphic - Front

Graphic Back

 

Architects and Engineers Specification

The Graphic Equaliser shall provide +/-12dB of boost and cut at 30 1/3 octave ISO centre frequencies from 25Hz-20kHz.

A Power On Led shall be provided.

The Graphic Equaliser shall meet or exceed the following performance specifications:

Frequency Response

+/- 0.5dB (20Hz-20kHz)

Distortion

(THD+N) <0.005% @1kHz, +4dBu

Dynamic Range

>112 dB (20Hz-20kHz unweighted)

The Graphic Equaliser shall allow have one fixed second-order high pass filter with an 80 Hz corner frequency and one fixed second-order low pass filter per channel with a 12 kHz corner frequency.

The Graphic Equaliser shall have an equalisation section by-pass and shall be fail-safe, that is the unit shall return automatically to the by-pass condition in the event of power supply interruption.

The Graphic Equaliser shall use centre-detented slide potentiometers arranged to give a graphical display of frequency plotted against level. The slide potentiometers shall have protective covers to inhibit the ingress of dirt and dust.

All audio connections shall be electronically balanced and use XLR and 1/4" TRS jack connectors.

The Graphic Equaliser shall be capable of operating from a 100-240V +/- 10% 50/60Hz a.c. power source.

The Graphic Equaliser shall be the KLARK TEKNIK Square ONE Graphic, and no alternative specification option is available

 

Equaliser กราฟิกจะต้องให้ + /-12dB ของการเพิ่มและตัดวันที่ 30 1/3 คู่ ISO ความถี่กลางจาก 25Hz-20kHz
 
สัญญาณไฟจะต้องมี
 
Equaliser กราฟิกจะต้องตอบสนองหรือเกินกว่าข้อกำหนดประสิทธิภาพต่อไปนี้:
 
การตอบสนองความถี่
+ / - 0.5dB (20Hz-20kHz)
 
การบิดเบือน
(THD + N)% <0.005 @ 1kHz, +4 dBu
 
ช่วงไดนามิค
> 112 dB (20Hz-20kHz ชั่ง)
 
Equaliser กราฟิกจะยอมให้มีหนึ่งคงผ่านเครื่องกรองที่สองเพื่อสูงด้วยความถี่ 80 Hz และมุมหนึ่งคงผ่านเครื่องกรองที่สองเพื่อต่ำต่อช่องทางที่มีความถี่ 12 kHz มุม
 
Equaliser กราฟิกต้องมีส่วนทำให้เท่าเทียมกันโดยผ่านและจะไม่ปลอดภัยที่เป็นหน่วยจะกลับโดยอัตโนมัติเพื่อให้สภาพโดยผ่านในกรณีที่มีการหยุดชะงักของแหล่งจ่ายไฟ
 
Equaliser กราฟิกจะใช้ศูนย์ detented Potentiometers สไลด์จัดให้แสดงผลกราฟิกของความถี่วางแผนกับระดับPotentiometers สไลด์ต้องมีการป้องกันครอบคลุมการยับยั้งการซึมผ่านเข้าไปยังสิ่งสกปรกและฝุ่นละออง
 
ทุกการเชื่อมต่อเสียงจะสมดุลทางอิเล็กทรอนิกส์และใช้ XLR และ 1/4 "TRS เชื่อมต่อแจ็ค
 
Equaliser กราฟิกจะต้องสามารถดำเนินงานจาก 100-240V + / - 10% 50/60Hz AC แหล่งพลังงาน
 
Equaliser กราฟิกจะ KLARK TEKNIK หนึ่งตารางกราฟิกและตัวเลือกสเปคไม่มีทางเลือกใช้ได้
 

Technical Specification

Inputs Two
Type Electronically balanced (pin 2 hot)
Impedance (Ω) 20k
Outputs Two
Type Electronically balanced (pin 2 hot)
Minimum load impedance 600 Ω
Source impedance <60 Ω
Maximum level +22dBu into >2kΩ
Performance
Frequency response
EQ out ±0.5 dBu
EQ in (flat) ±0.5 dBu
Distortion (THD+N) < 0.005% @ 1kHz, +4 dBu
Noise Floor <-90 dBu
Overload indicator +19 dBu
Gain - ∞ to +6dBu
Equalisation 30 Bands
Centre Frequencies To BS EN ISO 266:1997
  25Hz-20kHz, 1/3 octave
Tolerance ±5%
Maximum Boost/Cut ±12dB
High Pass Filter Slope 12 dB/octave
Low Pass Filter Slope 12 dB/octave
Terminations
Audio 3-pin XLR and 1/4” TRS jack
Power 3-pin IEC
Power Requirements
Voltage 100V-240V a.c. ± 10%
Consumption <25W
Dimensions
Height 133mm (5.25 inch) – 3U High
Width 482mm (19 inch)
Depth 205mm (8 inch)
Weight
Nett 4.4kg
Shipping 5.4kg

 

เขียนรีวิว

โน๊ต: ไม่รองรับข้อความแบบ HTML!
    ไม่ชอบ           ชอบ

When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.

The total time it takes to receive your order is shown below:

img

The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.

Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.

Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.

Shipping from your local warehouse is significantly faster. Some charges may apply.

In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!

Size Chart