MGP24X
โปรโมชั่นพิเศษสุดยังลดราคาได้อีก โทร. 085-6383516
คำอธิบายของผลิตภัณฑ์
Mixer รุ่นใหม่ จาก YAMAHA MGP Series
MGP32X / MGP24X Specifications
| Outline | MGP32X | MGP24X | |
|---|---|---|---|
| Mixing capability | Mixing channels | 32 Line Inputs (24 mono and 4 stereo) | 24 Line Inputs (16 mono and 4 stereo) |
| GROUP | 4 GROUP Buses + ST Bus | 4 GROUP Buses + ST Bus | |
| AUX | 6 AUX Sends + 2 FX Sends | 6 AUX Sends + 2 FX Sends | |
| MATRIX | 1 Matrix out | 1 Matrix out | |
| On-board processors | FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) | FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) | |
| I/O | Mic inputs | MIC: 24 (INPUTS HPF: 100Hz 12dB/oct) | MIC: 16 (INPUTS HPF: 100Hz 12dB/oct) |
| Phantom power | 48V phantom power per channel | 48V phantom power per channel | |
| Line inputs | LINE: 24 mono + 4 stereo, CH INSERT: 24 RETURN: 1 stereo | LINE: 16 mono + 4 stereo, CH INSERT: 16 RETURN: 1 stereo | |
| Digital I/O | USB Device, iPod / iPhone | USB Device, iPod / iPhone | |
| General specifications | MGP32X | MGP24X | |
| Total harmonic distortion | 0.02% (20Hz-20kHz@ +14dBu) | 0.02% (20Hz-20kHz@ +14dBu) | |
| Frequency response | +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz | +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz | |
| Hum & noise level | Equivalent input noise | -128 dBu Equivalent Input Noise | -128 dBu Equivalent Input Noise |
| Residual output noise | -94 dBu Residual Output Noise | -94 dBu Residual Output Noise | |
| Crosstalk | -74dB @ 1kHz | -74dB @ 1kHz | |
| Power requirements | 100-240V 50Hz/60Hz | 100-240V 50Hz/60Hz | |
| Power consumption | 86W max | 86W max | |
| Dimensions | W | 1,027mm (40.4") | 819mm (32.2") |
| H | 169mm (6.7") | 169mm (6.7") | |
| D | 565mm (22.2") | 565mm (22.2") | |
| Net weight | 19kg (41.9lb) | 15.5kg (34.2lb) | |
MGP16X / MGP12X Specifications
| Outline | MGP16X | MGP12X | |
|---|---|---|---|
| Mixing capability | Mixing channels | 16 Line Inputs (8 mono and 4 stereo) | 12 Line Inputs (4 mono and 4 stereo) |
| GROUP | 4 GROUP Buses + ST Bus | 4 GROUP Buses + ST Bus | |
| AUX | 2 AUX Sends + 2 FX Sends | 2 AUX Sends + 2 FX Sends | |
| Input channel functions | Compressor CH1-8,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-8,13-16)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH9-12)/ Low 125Hz shelving | Compressor CH1-4,HPF(100Hz 12dB/oct), CH EQ(MONO) ±15dB(Max.):High 8kHz shelving/ Mid 250Hz-5kHz peaking(CH1-4,9-12)/ Low 125Hz shelving, CH EQ(STEREO) ±15dB(Max.):High 8kHz shelving/ Mid 2.5kHz peaking(CH5-8)/ Low 125Hz shelving | |
| On-board processors | FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control) | FX1:REV-X(8 PROGRAM, PARAMETER control), FX2:SPX (16 PROGRAM, PARAMETER control) | |
| I/O | Mic inputs | MIC: 10 | MIC:6 (100Hz 12dB/oct) |
| Phantom power | 48V phantom power per channel | 48V phantom power per channel | |
| Line inputs | LINE: 8mono+4stereo, CH INSERT: 8, RETURN: 1stereo, 2TR IN: 1 stereo | LINE: 4mono+4stereo, CH INSERT IN: 4, RETURN: 1stereo, 2TR IN: 1 stereo | |
| Digital I/O | USB Audio USB IN: iPod, iPhone exclusive | USB Audio USB IN: iPod, iPhone exclusive | |
| General specifications | MGP16X | MGP12X | |
| Total harmonic distortion | 0.02% (20Hz-20kHz@ +14dBu) | 0.02% (20Hz-20kHz@ +14dBu) | |
| Frequency response | +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz | +0.5/-1.0dB 20Hz - 20kHz, refer to the nominal output level @1kHz | |
| Hum & noise level | Equivalent input noise | -128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum) | -128 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum) |
| Residual output noise | -102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum) | -102 dBu (20Hz–20 kHz, Rs=150Ω, Input Gain = Maximum) | |
| Crosstalk | -74dB @ 1kHz | -74dB @ 1kHz | |
| Power requirements | 100-240V 50Hz/60Hz | 100-240V 50Hz/60Hz | |
| Power consumption | 55W max | 45W max | |
| Dimensions | W | 447mm | 348mm |
| H | 143mm | 143mm | |
| D | 495mm | 495mm | |
| Net weight | 9.0kg | 7.5kg | |
Analog input specifications
| Input terminal |
Actual source impedance |
For use with nominal |
Input level | Connector | ||||
|---|---|---|---|---|---|---|---|---|
| PAD | GAIN | Sensitivity*1 | Nominal |
Max. before clip |
||||
|
MONO CH INPUT MGP32X: 1–24 MGP24X: 1–16 |
0 | -60dB | 3kΩ |
50-600Ω Mics |
-80 dBu (0.078 mV) |
-60 dBu (0.775 mV) |
-40 dBu (7.75 mV) |
XLR-3-31 type*2 Phone jack*4 |
| -16dB |
-36 dBu (12.3 mV) |
-16 dBu (123 mV) |
+4 dBu (1.23 V) |
|||||
| 26dB | -34dB |
600Ω Lines |
-54 dBu (1.55 mV) |
-34 dBu (15.5 mV) |
-14 dBu (155 mV) |
Phone jack*3 | ||
| +10dB |
-10 dBu (245 mV) |
+10 dBu (2.45 V) |
+30 dBu (24.5 V) |
|||||
|
STEREO CH INPUT MGP32X: 25–32 MGP24X: 17–24 |
-34dB | 10kΩ |
600Ω Lines |
-54 dBu (1.55 mV) |
-34 dBu (15.5 mV) |
-14 dBu (155 mV) |
Phone jack*4 RCA Pin Jack |
|
| +10dB |
-10 dBu (245 mV) |
+10 dBu (2.45 V) |
+30 dBu (24.5 V) |
|||||
|
MONO CH INSERT INPUT MGP32X: 1–24 MGP24X: 1–16 |
10kΩ |
600Ω Lines |
-20 dBu (77.5 mV) |
0 dBu (0.775 V) |
+20 dBu (7.75 V) |
Phone Jack*5 | ||
| ST CH INSERT INPUT L,R | 10kΩ |
600Ω Lines |
-20 dBu (77.5 mV) |
0 dBu (0.775 V) |
+20 dBu (7.75 V) |
Phone Jack*5 | ||
| TALKBACK INPUT | 10kΩ |
50-600Ω Mics |
-66 dBu (0.389 mV) |
-50 dBu (2.45 mV) |
-30 dBu (24.5 mV) |
XLR-3-31 type*6 | ||
0 dBu is referenced to 0.775 Vrms. 0 dBV is referenced to 1 Vrms.
*1 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level. (all faders and level controls are at maximum position.)
*2 XLR-3-31 type connectors are balanced .(1=GND, 2=HOT, 3=COLD)
*3 Phone Jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*4 Phone Jacks are unbalanced.
*5 Phone Jacks are unbalanced.(Tip=Out, Ring=In, Sleeve=GND)
*6 XLR-3-31 type connectors is unbalanced.
Analog output specifications
| Output terminal |
Actual source impedance |
For use with nominal |
Output level | Connector | |
|---|---|---|---|---|---|
| Nominal | Max. before clip | ||||
| ST OUT [L,R] | 75Ω | 600Ω Lines |
+4 dBu (1.23 V) |
+24 dBu (12.3 V) |
XLR3-32 type*1 Phone jack*4 |
| MONO OUT | 75Ω | 600Ω Lines |
+4 dBu (1.23 V) |
+24 dBu (12.3 V) |
XLR3-32 type*1 |
| GROUP OUT (1-4) | 150Ω | 10kΩ Lines |
+4 dBu (1.23 V) |
+20 dBu (7.75 V) |
Phone jack*2 |
| AUX SEND (1-6) | 75Ω | 600Ω Lines |
+4 dBu (1.23 V) |
+24 dBu (12.3 V) |
XLR3-32 type*1 |
| MATRIX OUT (1, 2) | 150Ω | 10kΩ Lines |
+4 dBu (1.23 V) |
+20 dBu (7.75 V) |
Phone jack*2 |
|
MONO CH INSERT OUT MGP32X: 1–24 MGP24X: 1–16 |
75Ω | 10kΩ Lines |
0 dBu (0.775 V) |
+20 dBu (7.75 V) |
Phone jack*3 |
| ST CH INSERT OUT [L,R] | 75Ω | 10kΩ Lines |
0 dBu (0.775 V) |
+20 dBu (7.75 V) |
Phone jack*3 |
| MONITOR OUT [L,R] | 150Ω | 10kΩ Lines |
+4 dBu (1.23 V) |
+20 dBu (7.75 V) |
Phone jack*2 |
| PHONES OUT | 150Ω | 40Ω Phones | 3mW | 75mW | ST Phone Jack |
0 dBu=0.775 Vrms, 0 dBV=1 Vrms
*1 XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*2 Phone jacks are impedance balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*3 Phone jacks are unbalanced. (Tip=Out, Ring=In, Sleeve=GND)
*4 Phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!