LS600 PRODUCT FEATURES
Components: LF 1 x 15" (38cm) long excursion Neodymium 8Ω driver.
Height x Width x Depth 435mm x 688mm x 528 mm (17.12" x 27.09" x 20.79").
Weight 30 kg (66 Lbs) net.
Connectors 2 x NL4MP SPEAKON 4 pole.
Construction Baltic Birch Ply & textured, polyurethane black coating.
Fittings Handles 2 Metal recessed pockets.
Flying Points One plate connecting with external accessories.
Stand fittings Internal Steel Stand Fitting on Top (35mm, 1 3/8") allows pole mounting for 1 PS10-R2.
SYSTEM SPECIFICATIONS LS600 with PS10 TDController-R2
Frequency Response [a] 40 Hz - 110 Hz ±3dB.
Usable Range @-6dB [a] 38 Hz - 120 Hz.
Sensitivity 1W @ 1m [b] 101 dB SPL Nominal.
Nominal Peak SPL @ 1m [b] 135 to 138 dB Peak.
Crossover Frequencies 120 Hz Active through PS10 TD Controller-R2.
Nominal Impedance 8 Ohms.
Recommended Amplifiers 1000 to 2000 Watts / 8 Ohms.
Electronic Controller The LS600 Subwoofer must be used with a Nexo Controller (PS10TD -R2, NX242, or NXAMPS).
Use without a properly connected Controller will result in poor sound quality and may damage the
Subbass The LS600 Subwoofer provides optional VLF extension for PS10R2 Loudspeakers.
Active two-way operation with the PS10-R2 is included in the PS10TD-R2, NX242 or NXAMPS.
One LS600 matches 2 x PS10-R2, additional LS600 may be used for enhanced effect.
Speaker Cables The PS10R2 is wired 2- & 2+ on Speakon connectors, LS600 on 1- & 1+. Loop through
Speakons are present on both products. Single identical cables can thus be used to loop through
combinations of up to 2 x PS10R2 & 1 x LS600 in no particular order. As part of a policy of
continual improvement, NEXO reserves the right to change specifications without notice.
NEXO loudspeakers and electronics are covered against defects in workmanship or materials for a period of two (2) years from the original date of
purchase. At the option of NEXO the defective item will be repaired/replaced with no charge for materials/labour. The item is to be adequately
packaged and dispatched, pre-paid, to a NEXO authorised distributor/service centre. Unauthorised repair shall void the warranty. The NEXO
warranty does not cover cosmetics or finish and does not apply to any items which in NEXO’s opinion have failed due to used abuse, accidents,
modifications or any type of misuse. All images and text herein are the property of NEXO SA, and deemed accurate, although specifications are
subject to change without notice.
As part of a policy of continual improvement, NEXO reserves the right to change specifications without notice.
[a] Response curves & data : Anechoic Far Field for the PS10-R2 + PS10TDController-R2. Half-Space Anechoic radiation for the LS600 + PS10
[b] Sensitivity & Peak SPL data : these will depend on spectral distribution and crest factor of program material. Measured with band limited Pink Noise.
Nominal refers to Voice Decade (300 Hz - 3 kHz),Wideband to the specified ±3dB range. Data are for speaker + processor + recommended amplifier
Peak SPL is at clipping of recommended amplifier.
[c] Directivity curves & data : obtained by computer treatment on off axis response curves.
E&OE September 2009.
SHIPPING & ORDERING
Packaging LS600 is packaged as a single product.
Shipping Weight & Volume 29.4 kg (64.68 lbs) / 0.265 cubic metres.
Architectural and Engineering Specifications
The sub-bass loudspeaker system shall have one 15 inch shielded Neodymium 8 Ω long excursion cone transducer. Nominal Sensitivity shall be
101dB. When driven by a NEXO NXAMP 4x1, NXAMP 4x4 a PS10 TDController-R2 or by a NX242 properly-connected to amplification capable of
delivering 1000 to 2000 Watts into a 4Ω (nom
• High-power system (138dB Peak SPL @ 1m)
with 15in VLF long excursion driver.
• VLF extension (to 38Hz) of PS10-R2 Loudspeakers.
• Sophisticated control electronics ensure
reliable, linear operation.
• Integral pole mount that supports one or two
• Touring, installed PA for clubs, A/V, theatre,
broadcast, Houses of Worship, etc. High-quality
stage monitoring for cabarets A/V, theatre,
• Fill-in system for use with larger NEXO
PS/Alpha systems, or any application needing
exceptional side, down and near-field