LCT 550
โปรโมชั่นพิเศษสุดยังลดราคาได้อีก โทร. 085-6383516
Your shopping cart is empty!
คำอธิบายของผลิตภัณฑ์
- คอนเดรเชอร์ไมค์แบบเฟต รูปแบบ cardioid ขนาดแคปซูล 12 นิ้ว
- 143 dB SPL
- Pre-attenuation 3 ตำแหน่ง (0 dB, 6 dB, และ 12 dB)
- HPF 3 ตำแหน่ง ๖์น โรสะำพม 12 dB / octave at 80 Hz, 6 db / octave at 160 Hz
- 20 Hz-20 kHz
Features
· A perfect match – highly precise calibration of capsule and electronics means that any two microphones from this series will always form a matched pair at +/- 0 dB
· Precise transient response thanks to the 3-micron-thin, gold-layered, low-mass, 1-inch Mylar diaphragm
· Extraordinary sensitive: capture even extremely weak signals with great precision and detail
· Cardioid polar pattern for effective rear sound rejection
· 0 dB (A) self-noise from electronics and circuitry *
· 140 dB dynamic range Max. SPL of 155 dB (A)
· Immune to electromagnetic interference thanks to transformerless preamplifier circuitry
· Illuminated user interface for quick and easy handling in dark environments
· Noiseless pushbuttons for attenuation and low-cut selection
· Automatic Attenuation and Clipping History mode
· Rugged zinc die-cast body
· Internal shock mount for maximum reduction of structure borne noise
· Corrosion-resistant gold-plated 3-pin XLR output connector
Top applications
· Classical instruments and ensembles
· Ambitious stereo recording techniques (XY, ORTF, AB, ...)
· Vocals & background vocals
· Acoustic instruments (strings, guitars, piano and similar)
· Drum & percussion overhead
Tech Data
Acoustical operating principle |
pressure gradient transducer, externally polarized |
Diaphragm |
3 micron gold sputtered Mylar |
Transducer Ø |
25,4 mm / 1 inch |
Polar pattern |
cardioid |
Frequency range |
20 to 20.000 Hz |
Sensitivity |
36 mV / Pa (-29 dBV), +/- 0 dB @ 1 kHz |
Signal / noise ratio |
91 dB (A) |
Equivalent noise level |
0 dB (A) self-noise from electronics and circuitry |
Dynamic range of FET mic. Amp. |
140 dB (A) |
Max. SPL for 0,5 % THD |
143 dB, 0 dB pre-attenuation |
Pre-attenuation pad |
6 dB, 12 dB, switchable |
Low cut |
12 dB / octave at 80 Hz |
Rated impedance |
< 150 ohms |
Rated load impedance |
> 1.000 ohms |
Supply voltage |
48 V +/- 4 V |
Current consumption |
5,5 mA |
Enclosure |
Zinc die cast |
Connector |
gold plated 3-pin XLR |
Dimensions |
158 x 52 x 36 mm / 6,22 x 2,04 x 1,42 inch |
Net weight |
425 g / 14,9 oz |
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!