K8
โปรโมชั่นพิเศษสุดยังลดราคาได้อีก โทร. 085-6383516
Your shopping cart is empty!
คำอธิบายของผลิตภัณฑ์
K8 features include:
- 8” Woofer; 1.75” diaphragm compression driver
- 105° Nominal coverage angle
- Maximum SPL 127 dB peak
- 1000 watt continuous Class D power modules in all models
- Onboard mixer with two combo XLR and ¼” inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output
-
Extensive DSP enhances system performance
- DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
- Intrinsic Correction™, first featured in our high-end line-array products maps 65-75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target. The result is a speaker that behaves equally well across the entire sound field.
- DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
- GuardRail™ protection protects both the amplifier module and your performance from unnatural and destructive clipping.
- Attractive and professional appearance
- Rugged ABS enclosures
- 16 Gauge powder coated steel grille
- Comfortable ergonomic handles
- 35 mm pole sockets with Tilt-Direct™
- M10 rigging points
- Eye-bold and Yoke Mount accessories available
K Series | |||
SPECIFICATIONS | K8 | K10 | K12 |
---|---|---|---|
Configuration | Trapezoidal 2-way | Multipurpose 2-way | Multipurpose 2-way |
Transducers Low-frequency High-frequency |
8" cone transducer 1.75" diaphragm compression driver |
10" cone transducer 1.75" diaphragm compression driver |
12" cone transducer 1.75" diaphragm compression driver |
Frequency Response (-6 dB) | 66 Hz - 18 kHz | 60 Hz - 18 kHz | 52 Hz - 18 kHz |
Frequency Range (-10 dB) | 61 Hz - 20 kHz | 56 Hz - 20 kHz | 48 Hz - 20 kHz |
Nominal Coverage (-6 dB) | 105° conical | 90° conical | 75° conical |
Maximum SPL1 | 127 dB peak | 129 dB peak | 131 dB peak |
Amplifiers | |||
Power Output2 |
1000 W continuous Class D (500 W LF, 500 W HF) 2000 W peak |
1000 W continuous Class D (500 W LF, 500 W HF) 2000 W peak |
1000 W continuous Class D (500 W LF, 500 W HF) 2000 W peak |
Input Impedance (ohms) |
XLR / ¼": 40k balanced / 20k unbalanced XLR / ¼" MIC mode: 2260 balanced RCA: 10k |
||
Controls | Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit) | ||
Indicators | Power, Signal A, Signal B, Standby, Limit, Mic | ||
Connectors | Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector | ||
Cooling | On demand, 50 mm variable speed fan | ||
Amplifier Protection | Thermal limiting, output overcurrent, overtemperature muting, GuardRail™ | ||
Transducer Protection | Thermal limiting, excursion limiting | ||