iQ10
โปรโมชั่นพิเศษสุดยังลดราคาได้อีก โทร. 085-6383516
Your shopping cart is empty!
คำอธิบายของผลิตภัณฑ์
https://mediadl.musictribe.com/media/sys_master/ha8/hb2/8848227991582.pdf <<<สเปค
Specification
2,500 Watt 2 Way 10" Powered Loudspeaker with KLARK TEKNIK DSP Technology, Speaker Modelling and ULTRANET Networking
The 2,500-Watt iQ10 is a powered two-way loudspeaker ideally suited for a wide range of portable and fixed installation, music and speech sound reinforcement applications. The driver complement includes an 10" low frequency driver with a low mass voice coil for improved transient response, and a high temperature 1" compression driver with copper-clad aluminium voice coil for extended high frequency reproduction.
Equipped with a very efficient and lightweight two channel KLARK TEKNIK Class-D power amplifier, the iQ10 provides an impressive 2,500 Watts of output power. A high degree of control over the loudspeaker system’s performance is managed by a sophisticated, but easy to use KLARK TEKNIK Digital Signal Processor (DSP), which provides dynamic EQ for remarkable full range response at low volume levels, and transparent limiting for the utmost clarity at high output levels – and long-term reliability. iQ10’s advanced DSP speaker modelling presets include detailed and accurate models of some of the audio industry’s most-respected loudspeakers.
KLARK TEKNIK also developed a highly versatile Spatial Contour Control (SCC) DSP function, which allows the user to easily optimise the iQ10’s frequency response for the physical speaker placement. This advanced functionality provides frequency compensation for stand, floor, wall or ceiling placement, much like the adjustments commonly found on studio reference monitors.
On the rear panel amplifier module, you will find a fully featured user interface consisting of an LCD display, the Channel A and B gain controls, and a single rotary encoder for intuitive access to level, EQ, Speaker modelling, SCC, Subwoofer Integration and Feedback Control (FBI). In addition to the two combination balanced XLR/jack inputs, balanced XLR outputs for each of the two independent channels, and a Mix Out XLR connector, the iQ10 features a mic/line switch and level control with signal present LED on each channel.
The iQ10 also features our proprietary ULTRANET technology, which allows the use of CAT5 cables for transmitting pristine multi-channel audio signals and other information between ULTRANET-enabled products, such as digital mixers and personal monitor systems. This digital distribution networking not only eliminates the potential for RFI and crosstalk so common to analogue methods, but also significantly reduces the setup or installation time required. An onboard USB port provides access for remote control of the iQ10 via PC computer, as well as DSP and speaker modelling firmware updates.
The lightweight fibre glass reinforced composite enclosure is fitted with a rugged powder coated perforated steel mesh grille and multiple internal rigging points for permanent installations. The iQ10 is also fitted with a dual angle pole mount socket, allowing the enclosure to be pole mounted straight on, or raised and angled downwards for optimal audience coverage. Mains power input and link output is provided via Neutrik powerCON* connectors.
Specifications
Frequency Response |
55 Hz – 18 kHz ±3 dB 50 Hz – 20 kHz -10 dB |
---|---|
Nominal Dispersion | 90° H x 60° V @ -6 dB points |
Maximum SPL | 123 dB peak |
Crossover type | Active |
Transducers |
1 x 10" (256 mm) LF driver 1 x 1" (25.4 mm) HF compression driver |
Limiter | Independent HF, LF, peak and rms |
Maximum output power* | 2,500 W |
Type | Class-D |
Protection | Short circuit, open circuit, thermal |
Input A / B | 2 x combo jack/XLR |
Sensitivity | Line +4 dBu, mic -22 dBu, switchable |
Input impedance | 20 kΩ unbalanced, 40 kΩ balanced |
Maximum input level | +21 dBur |
Output A / B | 2 x XLR Linked to input |
Mix output | XLR, balanced |
Output impedance | 100 Ω unbalanced, 200 Ω balanced |
Ultranet input/link | 2 x RJ45 |
Mains Supply | Neutrik powerCON input 20A and link 15A |
DSP |
Rotary push-encoder Buttons for PROCESS, SETUP, EXIT, ENTER |
Mixer section |
2 x gain controls (channels A and B) 2 x Line/Mic switch |
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!