- XLR balanced ins and outs
- Mode switch for stereo 2-way or mono 3-way operation
- Low frequency summed (subwoofer) output
- x10 range switch on both channels
- 40Hz high pass (low cut) filter both channels
- Phase reverse switch on all outputs
- Individual level controls on all outputs
- 24dB per octave Linkwitz-Riley filters (the professional standard)
- Stereo/Mono status LEDs indicate the selected mode
- dbx® 2 year parts and labor as standard
- CSA NRTL/C approved
- CE compliant
|Input Connectors||XLR (pin 2 hot)|
|Input Type||Electronically balanced/unbalanced, RF filtered|
|Input Impedance||Balanced >50k ohm, unbalanced >25k ohm|
|Max Input||>+22dBu balanced or unbalanced|
|CMRR||>40dB, typically >55dB at 1kHz|
|Output Type||Impedance-balanaced/unbalanced, RF filtered|
|Output Impedance||Balanced 200 ohm, unbalanced 100 ohm|
|Max Output||>+21dBu balanced/unbalanced into 2k ohms or greater|
|Bandwidth||20Hz to 20kHz, +/-0.5dB|
|Frequency Response||< 3 Hz to > 90 kHz, +0/-3 dB|
|Signal to Noise Ratio||Ref: +4 dBu, 22 kHz measurement bandwidth|
|Signal-to-Noise (Stereo Mode)||>94dB (Low Output), >91dB (High Output)|
|Signal-to-Noise (Mono Mode)||>94dB (Low Output), >93dB (Mid Output), >91dB (High Output)|
|Dynamic Range||> 106 dB, unweighted, any output|
|THD+Noise||< 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz|
|Interchannel Crosstalk||< -80 dB, 20 Hz to 20 kHz|
|Crossover Frequencies (Stereo Mode)||Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)|
|Crossover Frequencies (Mono Mode)||Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)|
|Crossover Filter Type||Linkwitz-Riley, 24 dB/octave, state-variable|
|Low cut Switch||Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.|
|Phase Invert Switch||Inverts the phase at the output, one switch per output.|
|x1 / x10 Switch||Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.|
When you order from opencartworks.com, you will receive a confirmation email. Once your order is shipped, you will be emailed the tracking information for your order's shipment. You can choose your preferred shipping method on the Order Information page during the checkout process.
The total time it takes to receive your order is shown below:
The total delivery time is calculated from the time your order is placed until the time it is delivered to you. Total delivery time is broken down into processing time and shipping time.
Processing time: The time it takes to prepare your item(s) to ship from our warehouse. This includes preparing your items, performing quality checks, and packing for shipment.
Shipping time: The time for your item(s) to tarvel from our warehouse to your destination.
Shipping from your local warehouse is significantly faster. Some charges may apply.
In addition, the transit time depends on where you're located and where your package comes from. If you want to know more information, please contact the customer service. We will settle your problem as soon as possible. Enjoy shopping!